Houston Industrial Coating Company
Have you been searching for Houston industrial coating company, but you do not know where to turn? Perhaps you are searching for a Houston coating company that has the abilities to handle many different types of coatings. Maybe you are looking for an industrial coating company in the Houston area that has the ability to determine which coating is correct for your equipment. Whatever your case may be, Fusion, Inc. has you covered.
Since their inception in 1959, they have been providing the greater Houston area with a wide variety of industrial coatings. They currently have the capability and knowledge to service HVOF coatings, twin arc coatings, combustion wire coatings, and plasma coatings. If these are services you are looking for give their professionals a call by dialing, 713-691-6547 or visit their website http://www.fusionhouston.com/ to see a complete list of services.
Fusion, Inc. has been in business for over 59 years because they have the expertise and quality customer service that you have been searching for. They are an industrial machine shop that specializes in the machining, coating, grinding, and finishing of rotating and reciprocating components. With their combined experience of over 100 years, you will be getting the highest quality to cover your project needs.
HVOF Industrial Coating Houston
HVOF coating is one of the most unique thermal spray processes on the market today. It is unique because it can be sprayed to a thickness that is not normally associated with dense, thermal spray coatings. Because of this, this type of coating is in use to improve a component’s surface properties. As a result, extending equipment life by increasing erosion, wear resistance, and corrosion protection.
During the HVOF coating process, a gas stream is produced by mixing and igniting oxygen and fuel in a combustion chamber. Allowing the high-high-pressure gas to accelerate through a nozzle. Then a powder is introduced into the stream where it is heated and accelerated towards the surface it is coating.
There are many advantages of HVOF coating which include low compressive stress, which results in very dense coatings. Weld-like bond strength, resistance to corrosion, able to perform in higher and lower temperatures. Along with minimal porosity and very hard coatings. These benefits lead to HVOF coatings making equipment more efficient and having a longer lifespan.
At Fusion, Inc., they perform HVOF coatings with the highest standards and deliver results that speak volumes about our 59 years of excellence in serving Houston. Because of this, call us today at 713-691-6547 to learn more about our HVOF coating services.
Twin Arc Industrial Coating Houston
Have you been searching for an industrial coating company that has knowledge of twin arc coating? Perhaps you have not found a shop that has the expertise you are looking for. Fusion, Inc. has the expertise you are looking for. The twin arc wire process uses two metallic wires. These two wires are electrically charged and are fed into the arc gun. When the wires are brought together at the contact point, the opposing charges are able to generate enough heat to constantly melt the tips of the wires. As a result, this then allows the coating to be projected onto the equipment.
The benefits of twin arc coatings are many and include that the process of coating applies a range a metallic alloys and pure metals. This allows for restoration and corrosion resistance of the equipment. During the coating process, there is no component distortion and it produces coatings that are easily ground or machined.
If you are looking to learn more about twin arc coating, contact Fusion, Inc. today by calling, 713-691-6547. They have the ability to perform twin arc coatings at the highest standards in the Houston area. You can also visit their website http://www.fusionhouston.com/ to learn more about out twin arc coating services. Or to see a full list of coating services they have to offer.
Combustion Wire Industrial Coatings Houston
Combustion wire coating process draws a metal alloy wire through the combustion spray gun. The heat of combustion, fueled by a gas-oxygen flame, melts the wire material being sprayed. The molten tipped wire is atomized as compressed air surrounds the flame. Combustion wire spraying is a process that delivers precision control and is safer to operate than some other methods. Because of this, the process of combustion wire spraying offers a solution that enhances productivity. It also delivers anticorrosion coatings. While reducing operating costs and extending component life.
If you have components that are in need of protective coatings that you feel could be executed through a process of combustion wire coating. Contact the professionals at Fusion, Inc. is to see how they are able to fulfill your needs. You can give them a call by dialing 713-691-6547. Or visit their website http://www.fusionhouston.com/ to see all full list of coating services they have to offer.
Contact Fusion, Inc. Today!
Fusion, Inc. has been serving the Houston area for over 59 years because they have proven to be the best Houston industrial coating company. They will ensure that they provide you and your equipment with the highest quality. You can visit their website http://www.fusionhouston.com/ to see a complete list of services they have to offer. They have the ability and experience to handle any project needs.
Fun Facts About Houston Texas
- Houston is the second fastest-growing major city in the United States, falling just short of New York City.
- Houston’s population doubled between 1950 and 1970. Jumping from 596,163 to 1,233,505. And since then, it has roughly doubled yet again to more than 2 million just in the city alone.
- Only 21 countries in the world have a GDP larger than Houston.
- To learn more about Houston click here.